baydee Door and window picture

vertical sliding windows sizes: How to Choose the Right Size for Your Home

Vertical sliding windows are a popular choice among homeowners who want to improve ventilation and natural light in their homes. But deciding which size of vertical sliding window to install can be a bit confusing. There are a lot of factors to consider, such as the room’s size, function, style preferences, and even building codes. In this article, we’ll walk you through the different vertical sliding windows sizes available, what factors to consider when choosing one, and how to measure for a proper fit.

vertical sliding windows sizes Available

Vertical sliding windows come in many different sizes, widths, and heights to accommodate various window openings. In general, the smallest size for a vertical sliding window is around 20 by 24 inches. The largest size often reaches up to 96 by 120 inches. However, the most common sizes for vertical sliding windows often fall within the following ranges:

- Width: 24 inches to 60 inches - Height: 36 inches to 72 inches

Of course, these sizes may vary depending on the manufacturer, style, and material of the window. Some manufacturers may also offer custom sizes for an additional cost.

Factors to Consider When Choosing vertical sliding windows sizes

When choosing a size for your vertical sliding windows, here are some important factors to consider:

1. Room purpose and function

The size of your vertical sliding windows should match the purpose and function of the room. For example, if you’re installing windows in a living room or bedroom, you may want larger sizes to allow more natural light in and better view of the outside. On the other hand, if you’re installing windows in a smaller room like a bathroom or home office, you may opt for smaller sizes to provide privacy and prevent overheating.

2. Building codes

Building codes and regulations often prescribe the minimum window size required for proper ventilation and emergency exits in case of fire or other emergency situations. Make sure to check your local building codes to ensure compliance.

3. Style preferences

Vertical sliding windows come in different styles, including single-hung, double-hung, and utility. Each style may have different recommended sizes and proportions that correspond to their design and function. Consider the architectural style of your home and your personal style preferences when choosing a size.

4. Materials and durability

Some materials like vinyl, fiberglass, and aluminum may have different load-bearing capabilities, and thus may require different sizes and reinforcement mechanisms. Check with the manufacturer or contractor for recommendations on proper sizes based on the materials and durability requirements of your specific window.

How to Measure for vertical sliding windows sizes

To ensure a proper fit, you’ll need to measure the window opening and frame accurately. Here’s how to do it:

1. Measure the width of the window opening from inside the frame, at the top, middle, and bottom. Take the smallest measurement as the actual width of the window.

2. Measure the height of the window opening from inside the frame, from the top of the sill to the bottom of the header. Take the longest measurement as the actual height of the window.

3. Take note of any obstructions or protrusions within the window opening that may affect the window’s size, such as locks, handles, and crank mechanisms.

4. Take into account the thickness of the wall and frame to ensure the window will fit properly and allow enough wiggle room for installation.


Choosing the right vertical sliding windows sizes for your home may seem daunting, but by considering the purpose of the room, adherence to building codes, personal style preferences, and accurate measurements, you can find the perfect window sizes that balance function and design. Discuss your options with your manufacturer or contractor to get expert advice on the best sizes and materials that work for your home.